Canned Garbage Truck Vehicle-mounted UHF RFID Reader Waterproof Thunderproof and Dustproof Industrial Grade UHF Card Reader

Description:

Canned garbage truck vehicle-mounted UHF RFID Reader is waterproof, lightning-proof and dust-proof industrial-grade UHF card reader, the working frequency band is 902~928MHz, supports ISO/IEC18000-6C / EPC G2C1 international interface standard, supports RS232 and RS485 interfaces Communication, supports modbus protocol, and is widely used in industrial automation RFID tags, code carrier identification, sanitation dustbin label reading and other fields. The bottom cover is designed to install iron sheets, which is convenient for the installation of readers in industrial production line environments. And has the following advantages:

1. The appearance adopts industrial design, which is durable and conforms to the harsh industrial production line environment. The protection level reaches IP66.

2. The radio frequency adopts a high-performance chip and is equipped with a high-performance label recognition algorithm

3. Standard interface RS232 [can be customized RS485] (Modbus RTU)

4. The software intelligently monitors the running status of the work, and it will run 24 hours X 365 days without crashing.

5. The bottom cover is designed to install iron sheets, which is convenient for the installation of readers in the industrial production line environment

6. Small in size and light in weight, it is convenient for the integration of industrial production line equipment.

Technical Parameters

Frequency range: 902-928MHz (can be adjusted according to different countries or regions)

Work area support:

US, Canada and other regions following U.S. FCC

Europe and other regions following ETSI EN 302 208 with & without LBT regulations

Mainland China, Japan, Korea, Malaysia, Taiwan

Frequency modulation mode: broad-spectrum frequency modulation (FHSS) or fixed frequency, can be set by software

RF output: 0-26dBm adjustable; 50 ohm load

Built-in antenna: dual feed point 40x40 ceramic antenna

Antenna Gain: 3dBi

Communication interface: RS232, (RS485 can be customized);

Communication rate: rate 9600 ~ 115200bps,

Reliable Firmware Upgrade: Scalable Upgrade Mechanism

Application software interface: provide API development kit and application routines

Working status display mode: LED indicator light (blue, red), buzzer

Read and write performance

Reading distance: the distance can be controlled at 30cm-200cm and set arbitrarily (related to label performance)

Writing distance: the distance can be controlled at 0cm-30cm and set arbitrarily (related to label performance)

Air interface protocol: EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C PROFIBUS/PROFINET

Maximum receiving sensitivity: -65 dBm

Mechanical and electrical properties

Product size: 95 (length) * 95 (width) * 40 (height) mm

Equipment power supply: industrial wide voltage design, 9-36V DC

LED indicator: blue: card reading indicator; red: power indicator

Product weight: 450g

Packaging: outer paper packaging, inner pearl cotton wrapping

Protection class: IP66

Connector form: round waterproof M5 pin socket connector

Connector Pin Definition

1 pin: GND; 2 pins: TXD; 3 pins: RXD; 4 pins: DC; 5 pins: GND

Installation method: fixed by iron sheet

Environmental parameters

Working temperature: -20ºC ～60ºC

Storage temperature: -20 ºC～85 ºC

Working humidity: 5%～95%RH, non-condensing

Applications:

Sanitation garbage can classification management, electric vehicle management, production line management, vehicle management, Asset MANAGEMENT, warehouse management, personnel management, weighing management, unmanned intelligent vending cabinet, cash box management, intelligent bookcase management AGV trolley rail guidance management and other fields