Gantry electroplating production line site RFID card reader

With the development of electroplating production lines and the need for environmental protection, traditional electroplating production lines are in urgent need of transformation and upgrading, and are developing in the direction of automation and intelligence. Relying on RFID technology, we have launched an electroplating RFID Card reader suitable for the electroplating industry. It has stable and reliable performance, good environmental resistance, and is not affected by oil, dust, particles, liquids, noise and other factors in the production environment. Supports binary, 8-bit parallel NPN transistor output format.

Gantry-type electroplating production line site RFID card Readers can be used in areas such as site identification of electroplating production lines, information collection on the electroplating process, and full life cycle management of electroplating racks.

Site identification: Install the RFID tag above the electroplating tank, and install the electroplating RFID card reader on the electroplating carriage. When the electroplating truck is performing electroplating operations, it will automatically identify the RFID tag when passing the electroplating tank, locate its position in real time according to different site tags, and collect the information of the electroplating tank at the same time. If the information is consistent, it will control the deceleration and stop above the corresponding electroplating tank. Perform electroplating operations.

Information collection: When the RFID tag enters the working range of the electroplating RFID Reader, the RFID reader will automatically collect the information of the RFID tag, and at the same time upload the collected information to the management system for entry, and record the time of electroplating and the type of electroplating , electroplating process and other information.

Life cycle management: Paste the RFID tag on the electroplating rack, and install the electroplating RFID reader on the corresponding workbench/work node. When the electroplating rack carrying the RFID tag enters the working range of the electroplating RFID reader, the RFID reader will obtain the RFID tag information on the electroplating rack in real time, record and upload the relevant information of the electroplating rack to the management system. Record the type of electroplating rack, the number of plating times, the plating time and other relevant information, and manage the entire life cycle of the electroplating rack to avoid the reduction of good electroplated products due to damage to the electroplating rack.

The gantry-type electroplating production line site RFID card reader is specially developed and produced for the electroplating production line. It mainly has the following characteristics and advantages:

Efficient identification: It can penetrate any material except metal to identify target objects without visual obstacles, and can identify high-speed moving objects.

Easy operation: The RFID radio frequency circuit and logic processing circuit are integrated internally. It does not occupy the serial port and is output directly through the 8-bit parallel NPN transistor. There is no need for external pull-up resistors and no need to understand complex communication protocols. Auto-tuning feature makes installation easy and achieves optimal performance.

Stable and reliable: Using dual-band operating frequencies of 134.2kHz and 125kHz, it can penetrate any material except metal without reducing its reading distance and sensitivity; IP67 protection level, it is not affected by oil, dust, particles, etc. in the production environment. It is resistant to interference from liquid, noise and other factors, and its performance is stable and reliable.

Efficient feedback: Able to monitor work goals in real time and feedback work information and work progress.