Universal intelligent access control switch receiving board Garage door flap door wireless remote control signal receiver RFID controller

Technical Parameters:

1. Control board input voltage: AC24V/50Hz

2. Static power consumption of the control board: ≤1W

3. Motor rated voltage: DC24V Maximum power: 50W

4. Working voltage of the remote control: DC12V (battery powered)

5 Remote control power consumption: working current ≤ 12mA

6. Remote control transmission frequency: 433MHz

7. Empty launch distance: 30 meters (more than 50 meters in open space without interference)

8. Working temperature: -20℃~+55℃

Function details:

1. Electronic limit function: use Hall element to collect motor running length and limit, easy to install and reliable to use;

2. Manual function: single key cycle control:

3. Obstruction detection function: stop when opening the door, stop after rebounding about 20 cm when closing the door, and stop when closing the door softly:

4. Automatic door closing function: When this function is turned on, the door will automatically close to the lower limit after opening the door to the upper limit for 5 minutes:

5. Courtesy light function: After the motor stops every time, the courtesy light will go out after a delay of 2 minutes and 50 seconds.