Second generation certificate NFC read-write card module IC card read-write module RFID read-write card module

This module requires secondary development before it can be used. Developers need to be familiar with the programming of the platform (such as Windows, Android, MCU platform) and the use of UART to operate this module. Our company only provides a universal serial port debugging assistant to test this module, which is not a universal module. If you have used modules from other companies before, they cannot be directly replaced. You also need to perform underlying development and docking!

[Support Cards]: Supports online identification of second-generation ID Cards; supports identification of pasSports and Hong Kong and Macao passes; also supports mifare one (M1), S50, S70, UL: NTAG2xx series, Furi F08, I-CODE-X and other types Label, city card, bank card identification, etc.

[ID card analysis]: Supports online analysis. After registering for the ID card channel, you can read out the identity document photo information.

[Passport Reading]: This module has the function of reading passports and Hong Kong and Macao passes, and can read out the identity information and photo information in the documents.

[Voltage range]: 5V (±0.5V)

[Support protocols]: IS014443A, IS014443B, 10S15693, 1S018092, Felica

[Operating temperature]:-20~85℃

[Communication interface]: UART (reserved USB interface)

[Baud rate]: 115200bps (default)

[Module size]: Main module: overall size (28.5*19*4.8mm), antenna module 28*45mm

[Reading distance]: 20mm~60mm (depending on the tag and antenna)

[Watchdog]: Built-in hardware watchdog to prevent crashes;

PREVIOUS：Erasable ground sensing tag AGV landmark card low frequency RFID code carrier NEXT：Retractable wand electronic ear tag identifier