Garage door control panel motor positive and negative control RFID control remote control

Features:

Working voltage: AC110-230V switching power supply design, energy saving and micro power consumption

Receive frequency: 315MHZ (other frequencies 299-433mhz)

Working mode: can be changed by the learning key; interlocking: jogging; self-locking mode

Coding matching method: learning coding, fixed coding after learning matching

Maximum load: Using 10A relay, it can control thousands of watts of lamps and electrical equipment

Receiving sensitivity: -105db with different remote controls, the distance can reach 50 meters to 400 meters

Radio coding technology, non-directional, switches do not interfere with each other.

Board size: 74*54*28MM

Instructions:

(1) Output mode selection and learning method: Press any key on the remote control, the learning indicator light should flash continuously, otherwise the controller cannot learn the remote control. Choose the output mode first and then learn the remote control.

(2) Selection of output mode: keep pressing the learning button, and after two seconds, the learning indicator light will turn on, and after another four seconds, the learning indicator light will turn from on to off (actually, this step is a reset operation). Continue to press the learning button, after two seconds, the indicator light will flash once; after another two seconds, it will flash twice; after another two seconds, it will flash three times. Release the learning button after the learning indicator light flashes once, then the output mode is interlocking mode; release the learning button after the indicator light flashes twice, then the output mode is self-locking mode; release the learning button after the indicator light flashes three times , the output mode is jog mode.

(3) The learning method of the remote control: press and hold the learning button, after two seconds, the indicator light will light up, release the learning button, press any key of the remote control to be learned, the learning indicator light will flash once, indicating that Key learning control the first way to success. Then press another key of the remote control to be learned, and the learning indicator light will flash three times and then go out, indicating that this key has successfully learned to control the second channel. . For remote controllers with the same type of fixed code, you can control other remote controllers with the same code as the first one, and you can match multiple remote controllers at will; for remote controllers with different types of learning codes, repeat the learning in step 3 to pair them. .

(4) Clear learning code: keep pressing the learning button, after two seconds, the learning indicator light will turn on, and after another four seconds, the learning indicator light will change from on to off, indicating that the reset is successful. After clearing, the previously paired remote controllers will no longer work.