AGV car obstacle avoidance and anti-collision radar scanner Path planning laser sensor Intelligent warehouse robot anti-collision radar scanner

Parameters:

Sensor type: optical sensor

Series: 270° Laser Sensor | Radar Scanner

Sensing method: TOF pulse ranging technology

Sensing distance: 0.25-5 meters (90% emissivity)

Response time:0-50MS

Input voltage: 18 (V)

Output signal: 4 NPN outputs

Termination type:Micro-USB

Intrusion protection level: IP65

Light source type: Laser wavelength 905nm

Working temperature: 30 (℃)

Minimum number of packages: 1 unit

Application areas: Electrical and electrical

Whether to provide exclusive supply for cross-border exports: No

Specifications: SE0522 (CNS-LS05I, 5 meters, 6 NPN inputs, 4 NPN outputs), SE0526 (5 meters, 6 PNP inputs, 4 PNP outputs), SE0533 (CNS-LS05C, 5 meters, 2 NPN output), SE0535 (5 meters, 4 NPN outputs), SE1035 (10 meters, 4 NPN outputs), SE1026 (10 meters, 6 PNP inputs, 4 PNP outputs), SE1022 (10 meters, 6 NPN inputs) , 4 NPN outputs), SE1033 (10 meters, 2 NPN outputs)

Applicable products: AGV | RGV car, handling robot navigation use

Number of obstacle avoidance channels: 64 channels

Functions: AGV navigation and obstacle avoidance, robot path planning, contour detection, height limit warning, anti-collision warning, intrusion warning, perimeter warning, etc.

Measurement frequency: 20HZ

270°TOF laser sensor

The laser scanning sensor operates according to the time of flight (TOF measurement principle). Under a very high synchronization clock, it emits laser at uniform time intervals. The laser beam will be reflected back when it encounters an object. After the scanning sensor receives the reflected beam, it passes The time difference between emission and reception is used to calculate the distance from the laser sensor to the object, and a two-dimensional scan of the surroundings is performed to obtain an environmental contour graphic. The protection area range is established through software configuration. Once an object is within the set area, the corresponding output port of the sensor outputs a signal, and the host computer obtains the signal and further makes a judgment and processing. Scanning range 270°, scanning radius 10m, degree angle resolution 0.5°, scanning frequency: 20Hz, providing 64 switching channels, Ethernet port configuration, ≤2W ultra-low power consumption.

Features:

Support multiple communication methods

Supports RS-485, CAN BUS, I/O PNP, Ethenet/IP, CAN open, I/ONPN, modbus, RS-232 and other communication methods to adapt to a variety of communication needs

Supports 64 channel selections

Configurable via Hinson software, providing up to 64 channel selections (each channel provides 3 independent detection ranges)

270° scanning range

Scanning radius: 5m/10m

Maximum scanning angle: 270°, minimum angular resolution: 0.1°, maximum detection distance: 10m (90% reflectivity)