UHF RFID Assisting Construction Vehicles to Avoid Collisions

With the scarcity of construction land resources and the continuous improvement of structural Engineering design and construction technology, super high-rise and high-rise structures are becoming more and more popular in the construction market, and dangerous safety accidents such as lifting machinery, formwork, scaffolding, and deep foundation pits are also happening. "A rising tide lifts all boats" due to the increase of super high-rise and high-rise structural buildings.

The RFID Smart Construction site solution builds an intelligent monitoring and prevention system through various monitoring devices installed on the construction site, effectively making up for the shortcomings of traditional methods and technologies in supervision, and realizing all-round real-time monitoring of personnel, machinery, materials, and the environment Monitoring, change passive "supervision" into active "monitoring"; truly achieve pre-warning, normal detection during the event, standardized management after the event, and information management of construction site safety production.

Anti-collision application of RFID construction vehicle

The anti-collision application of RFID engineering vehicles is to install UHF RFID Readers on engineering vehicles, so that all workers wear safety helmets with RFID electronic tags attached. When workers cross the boundary, it will receive an alarm and automatically lock . Use RFID technology to prevent accidents such as scratches, collisions, crushing, and car collisions caused by blind spots in the vision, resulting in serious consequences such as production line shutdowns, large compensations, and accountability by leaders.

The working principle of the RFID engineering vehicle anti-collision application is:

1. All personnel entering the workshop must wear safety helmets, and the RFID electronic tags are fixed on the outside of the safety helmets;

2. Install Honglu RFID reader and automatic alarm lights on the engineering vehicle. When the personnel pass through the safety range of the engineering vehicle, the RFID reader will automatically read the RFID tag information of the safety helmet of the surrounding personnel;

3. Set up base stations around the construction site to monitor the distance between base stations and between base stations and tags in real time;

4. In specific use, the base station and the tag are installed or worn on different objects or people that need to monitor the distance. The distance between the base station and the base station, and between the base station and the tag represents the distance between different objects. When the distance is less than the set The minimum value, the alarms and tags connected to the base station will send out alarms and real-time reminders to prevent collisions between different objects.