Small size, low power consumption | multiple communication methods | three working modes
IS018000-6C protocol | Support secondary development | Online technical guidance
Split reading and writing module
It needs to be used with an antenna. The higher the antenna gain, the better the card reading effect. It supports WG26/34, RS232/485, and TCP/IP communication.
Small size and low power consumption
Compact and easy to install, suitable for different application scenarios
Product size: 75*66*16mm
Working voltage: DC 12V
Working frequency: 865~868MHz, 902~928MHz
Working agreement: ISO18000-6C
Working mode: active mode, passive mode, trigger mode
Frequency hopping mode: wide-spectrum frequency hopping (FHSS) or fixed frequency, which can be set by software
Communication interface: WG26/34, RS232/485, TCP/IP
Card reading power: 0~30dBm adjustable
Work Tips: Buzzer
Power consumption: the maximum power is not more than 4W
Working temperature: -20℃~+80℃
Active mode
The device has been waiting for the card to be read, and when the tag enters the card reading range, it will immediately identify and obtain data.
Passive mode
The device is in the intranet, and a local computer or single-chip microcomputer is arranged. When the device receives the query command from the host computer, it reads the tags within the range and uploads them to the local computer.
Trigger mode
The device is in the standby state. When the tag passes the external trigger, the device is awakened by high/low level 10 to query the tag, and the data can be uploaded to the local computer.
Contact: Adam
Phone: +86 18205991243
E-mail: sale1@rfid-life.com
Add: No.987,Innovation Park,Huli District,Xiamen,China
Adam