UHF RFID R2000 High performance module UHF reader long-distance RFID reader

RFID UHF CHANNEL MODULE
Long-distance card reading,batch group reading ,6B6C protocol; beautiful appearance design, combined with a proprietary high-efficiency collision processing algorithm, while maintaining a high reading rate, it realizes fast reading and writing processing of electronic tags. Ethernet/RS-232/RS-485 (optional) communication, Wiegand communication interface can choose one more, and at the same time, an external infrared sensor and alarm light can be connected, which has strong compatibility and can easily cope with different scenarios.

Performance parameters

Frequency range: 840~960MHz (can be adjusted according to different countries and regions)

Frequency modulation mode: broad-spectrum frequency modulation (FHSS) or fixed frequency, can be set by software

RF output: 0-33dBm; 50 ohm load

Output power accuracy: +/-1dBm

Output power flatness: +/-0.2dBm

Number of antennas: 1-way MMCX4-way SMA8-way SMA16-way SMA antenna interface

Communication interface: FPC connector interface, TTLUart interface

Communication rate: serial rate 9600~115200bps

Reliable Firmware Upgrade: Scalable Upgrade Mechanism

General-purpose input/output: 4-way GPIO interface (2 input 2 output) (GPIO)

Tags RSSI: Support

Antenna connection protection: support

Ambient temperature monitoring: support


Label operation performance

Reading distance: 8dbi antenna configuration, the typical reading distance is 8-12 meters (related to the tag performance site environment)

Air interface protocol: ISO18000-6C/EPCC1G2ISO18000-6BGB/T29768-2013 (optional)

Maximum receiving sensitivity: 8dBi linearly polarized antenna, the insertion loss of the RF connection cable is less than 1dB standard label (sensitivity is better than -18dBm)

Inventory label peak speed: >500 sheets/second


Mechanical and electrical properties

01G Size: 60*42*4.5mm

04G Size: 80*52.5*7.8mm

08G Size: 80*92.5*7.8mm

16G Size: 90.5*178*7mm

Working voltage: 3.7V-5V

Standby state current: <50mA (EN pin high level)

Sleep state current: <100uA (EN pin low level)

Working current: 1.2A+/-10%

Humidity: 5%to95%, non-condensing

Heat dissipation method: external heat sink air cooling

Working temperature: -20cCto700C

Storage temperature: -40℃to85℃

UHF RFID R2000 High performance module UHF reader long-distance RFID reader

UHF RFID R2000 High performance module UHF reader long-distance RFID reader 2

UHF RFID R2000 High performance module UHF reader long-distance RFID reader 3

UHF RFID R2000 High performance module UHF reader long-distance RFID reader 6

UHF RFID R2000 High performance module UHF reader long-distance RFID reader 4

UHF RFID R2000 High performance module UHF reader long-distance RFID reader 5

UHF RFID R2000 High performance module UHF reader long-distance RFID reader 6



INQUIRY

Scan the qr codeclose
the qr code