RFID IC Card Reader-Writer MODULE

M2 module is a 13.56mhz high frequency reading and writing module, which has its own CPU control without secondary programming, complete serial transceiver without loading any driver, and can seamlessly connect with any system. The integrated onboard RADIO frequency antenna has more stable performance, which is very suitable for charging post, self-service sales and advertising integrated machine.

Specifications:


ItemParameter
Frequency13.56MHZ
ProtocolISO/IEC 14443 TypeA
Support CardsMifare(1K/4K); NXP S50,NXP S70; F08
Working VoltageDC +5V(Allow user to customize 3.3V)
Working Current60mA
Communication InterfaceRS232/USD/UART TTL
Baud Rate9600bps or 115200bps etc.
Communication Speed<100ms
Operating SystemWindows, Linux, Android, Vista
Weight5g
Working EnvironmentTemperature (-20℃~85℃); Humidity (5%-95%)
Size50 mm x 31.5 mm; Thickness of 1.2 mm
Sensing Sistance3-5cm
State of alertLED indicator light, controllable buzzer


Features:


◆The module is small in size, easy to install, widely used and easy to develop.

◆The built-in CPU control does not require the user to edit the program twice, and the IC card can be easily operated  through the serial port protocol.

◆Complete serial port control, can be seamlessly connected with any system, no need to install additional drivers, only need to connect VCC, TX, RX, GND four lines to communicate.

◆Ultra-wide voltage (3.3V/5V) is optional, and 5V power supply is used as standard, which can meet the output voltage of the serial port of most development boards.

◆Humanized design, the buzzer can be controlled as a reminder action, and the on-board power LED light is convenient to check the power-on status.

◆Complete functions, clear development protocol, support IC card read and write operations, sector encryption, CPU can Store 50 characters as flash backup data.

◆Support mode switching, read-only or read-write mode settings, three output formats can be switched in read-only mode.


INQUIRY

Scan the qr codeclose
the qr code