ID management card access control machine

Features:

1. Store 2000 cards (ID/IC optional)

2. Add and delete user cards through a management card

3. The door opening delay time can be changed through the management card

4, Can be connected to a Wiegand card reader

5. The door opening signal is directly output by the relay (NO/NC optional)

Technical parameter:

1. working power DC: Voltage 12±10% Current < 0.1A

2. max output Unlocking current: ≤2000MA

3. Ambient temperature -20℃～70℃

4. Relative humidity 20%～90%

5. storage capacity 2000 user cards, 1 management card

6. Card reading distance 5-15CM

7. card reader types EM or MF1 card

Instructions:

(1) Set the management card After connecting the brown wire to the ground, turn on the power, the red light is on, wait for three seconds to add the management card, after adding the management card, you will hear two beeps, the red and green lights flash together, disconnect the brown wire when the power is off, Power on to complete the addition of management cards. To replace the management card, you need to repeat the above process, and the new management card will overwrite the original management card.

(2) Format memory data After connecting the purple wire to the ground, turn on the power. After three seconds, you will hear two beeps, and the red and green lights flash together. When the power is off, remove the purple wire, and then turn on the power again, and the user data in the memory will be cleared. Note: Data emptied cannot be recovered, please use it with caution.

(3) Set the door opening delay time Connect the purple wire and the brown wire to the ground at the same time, then turn on the power again, the red light and the green light are on together, and swipe the management card (only the management card can be swiped, other cards are invalid). The buzzer will beep twice when the card is swiped, swiping the card once means a delay of one second, and swiping the card several times is a delay of several seconds. After the delay is set, power off, remove the brown wire and purple wire, and complete the setting of the door opening delay after power on. Note: The default door opening delay of the initialization controller is 3 seconds

(4) Add user card Power on the controller, swipe the management card once, wait for one second, the red light is off, the green light is flashing, swipe the unregistered card, and beep twice, indicating that the addition is successful. If you swipe the added card, you will hear a long beep, indicating that this is an added user card and cannot be added any more. After adding all user cards, swipe the management card to exit the user card adding program. If you do not swipe the management card, it will automatically exit the user card adding program after waiting for ten seconds.

(5) Delete user card Power on the controller to work, swipe the management card twice within one second, the red light is off, the green light is on, swipe the user card to be deleted, and the registered user card will hear two beeps, indicating that the user card is deleted successfully; if If it is not a registered user card, you will hear a long beep. After deleting the user card to be deleted, swipe the management card to exit the user card deletion program. If you do not swipe the management card, wait for ten seconds to automatically exit the user card deletion program.